Netvio Network Switches
Netvio Network Switches
| Netvio’s AVoIP Network Switches offer the ultimate networking solution for AVoIP systems, providing unmatched convenience with their zero-configuration, plug ‘n’ play setup. Allowing integrators to easily install AVoIP networks without the usual complexities that comes with AVoIP network configuration. |
Filter
- Netvio360 (PC, Mac) – Discovery, configure, optimise, design, control
- NetvioGO (iOS, Android) – Full spectrum end user AV control
- Netvio360 (PC, Mac) – Discovery, configure, optimise, design, control
- NetvioGO (iOS, Android) – Full spectrum end user AV control
-
No products matching those filter options within this category
Netvio 24 Port PoE+ AVoIP Network Switch
Netvio 24 Port PoE+ AVoIP Network Switch
Netvio’s network switches are the ultimate solution for AVoIP systems, offering unparalleled convenience with their zero-configuration required solution. Allowing integrators to effortlessly set up AVoIP networks, eliminating the usual complexities associated with AVoIP network configurations.
The 24 Port AVoIP Network Switch is a dedicated plug ‘n’ play AVoIP Switch that has been preconfigured for use with Netvio and other AV over IP solutions. The pre-configuration for multicast AVoIP solutions, supports systems with up to 21 encoders and/or decoders, requiring zero configuration.
All ports support PoE+ 30W, with a PoE budget of 450W, to power devices connected to all ports simultaneously.
The IP-SW-24P-10 is designed and suitable for systems with 21 or less AVoIP endpoints only, with 1 port reserved for Network LAN & 2x ports reserved for NV-IP-JP4-CL AV and Control connections.
Multiple IP-SW-24P-10 switches cannot be chained/used in the same system unless they are completely isolated systems. It is only designed to connect to AVoIP encoders and decoders.
FREE Software & Control:
Netvio 48 Port PoE+ AVoIP Network Switch
Netvio 48 Port PoE+ AVoIP Network Switch
Netvio’s network switches are the ultimate solution for AVoIP systems, offering unparalleled convenience with their zero-configuration required solution. Allowing integrators to effortlessly set up AVoIP networks, eliminating the usual complexities associated with AVoIP network configurations.
The 48 Port AVoIP Network Switch is a dedicated plug ‘n’ play AVoIP Switch that has been preconfigured for use with Netvio and other AV over IP solutions. The pre-configuration for multicast AVoIP solutions, supports systems with up to 45 encoders and/or decoders, requiring zero configuration.
All ports support PoE+ 30W, with a PoE budget of 950W, to power devices connected to all ports simultaneously.
The IP-SW-48P-10 is designed and suitable for systems with 45 or less AVoIP endpoints only, with 1 port reserved for Network LAN & 2x ports reserved for NV-IP-JP4-CL AV and Control connections.
Multiple IP-SW-48P-10 switches cannot be chained/used in the same system unless they are completely isolated systems. It is only designed to connect to AVoIP encoders and decoders.
FREE Software & Control: