Technology

The device or cable is rated for 1 Gigabits per second maximum achievable bandwidth.

Category 6 is the sixth generation of twisted pair Ethernet cabling that is used in Ethernet and other network data communication. The CAT6 standard specifies performance of a minimum 250MHz or 1 Gigabit per Second data transfer speeds. CAT6 must meet more stringent specifications for crosstalk and system noise than CAT5 and CAT5E.

24 American Wire Gauge, also referred to as 24AWG, refers to the thickness of the conductors used inside a cable. 24AWG refers to a conductor being 0.51mm thick in its total diameter.

PoE++ or Power over Ethernet is an electrical industry standard which allows power to be transmitted simultaneously with data signals over CAT cable, allowing devices to operate without
the need of a separate power supply. Maximum power per port: PoE++ provides up to 100watts at 52-57v, PoE+ provides up to 30watts at 50-57V, PoE provides up to 15.4 watts at 37-57V

U/UTP defines the amount and type of shielding on a cable. A U/UTP shielded cable does not have an outer shielding or any twisted pair shielding.

Gel Filled means that the cable is filled with a high quality, water resistant gel, sealing all gaps and recesses through the structure and coating the interior wire insulating layers to prevent
fluid propagation, repel moisture and reduce conductor damage. Making the cable perfect for direct burial applications.

UV Stabilised means that there has been a stabiliser added to the cable jacket or product material to allow it to protect from the long-term degradation that may be caused from exposure to
UV light. UV stabilisers work by absorbing and/or screening out UV radiation and preventing damage.

The Wooden Reel tech icon means that the bulk cable product is supplied on a standardised wooden reel. This reel will need to be used with a standard a frame spool dispenser or similar.

The Kordz 5 Year Warranty means that the associated product is covered under warranty for 5 years from date of purchase. Refer to www.kordz.com.au/warranty for more information.

  • Product outline

    Supplied on a wooden spool, the Kordz ONE Series CAT6 Outdoor-Rated, Gel-filled, UV Stabilised Bulk Network Cable exceeds the performance requirements of ANSI/TIA-568.2-D CAT6.

    • Suitable for 1000BASE-T/1000BASE-TX (Gigabit) & 5GBASE-T, PoE, PoE+ & PoE++
    • ANSI/TIA-568.2-D compliant for 1Gbps up to 100m and 10Gbps up to 55m
    • 24AWG Oxygen-Free Copper conductors with U/UTP 4-pair construction
    • Water resistant gel-filled for optimal moisture rejection
    • Tested to conform with IEC 60794-1-2 FSB requirements
    • Polyethylene-based UV stabilised cable jacket conforming to AS 1049 requirements
    • Metre-marked and spooled on a robust wooden reel for ease of outdoor use
    • Compatible with existing Kordz Cat6 networking components for streamlined integration
    • Kordz 5-Year Warranty
  • Technical info

    CONSTRUCTION

    Conductor: Solid OFC annealed bare copper wire 0.537 +0/-0.015mm [24AWG]
    Twisting: 4 twisted pairs, 2 cores to each pair
    Twisted Pair Colour Code: 1 – white-blue/blue, 2 – white-orange/orange, 3 – white-green/green, 4 – white-brown/brown
    Cable Lay-Up: 4 pairs with different pitches, non-metallic cross separator (spine)
    Filler: Water-resistant gel
    Buffer:
    Mylar tape
    Jacket Material:
    UV-stabilised polyethylene-based composite (LDPE)
    Outer Diameter:
    6.3 ± 0.5 mm

    MECHANICAL

    Bend Radius: without load ≥ 25.2mm, with load ≥ 50.4mm
    Temperature Range: During Operation: -20°C to 60ºC During Installation:  0°C to 50ºC

    ELECTRICAL

    DC Resistance: max. ≤ 9.38Ω / 100m at 20ºC
    Resistance Unbalance: max. ≤ 2% at 20ºC
    Insulation Resistance (500V): min. ≥ 5000MΩ / km at 20ºC
    Mutual Capacitance: max. 5.6 nf/100 m at 1 kHz
    Capacitance Unbalance (Pair to Ground): max. 330 pf/100 m at 1 kHz
    Nominal Velocity of Propagation: nom. 63 %
    Test Voltage: 1kV DC / 1 min

    PACKAGING

    Roll Size: 305m – metre marked
    Wooden Reel: 35cm x 35cm x 30cm
    Gross Weight: 14.8kg

  • Warranty

    The Kordz ONE Series Cat6 U/UTP Direct Burial Network Cable is backed by our 5 Year Product Guarantee.

  • Reviews

    No reviews yet, for the meantime would you take one minute to leave a feedback about your experience?

    Reviews

    There are no reviews yet.

    Be the first to review “ONE Series CAT6 Direct Burial Network Cable”

    Your email address will not be published. Required fields are marked *

    Leave a Review
  • Downloads

ONE Series CAT6 Direct Burial Network Cable

The Kordz ONE Series Cat6 Direct Burial Network Cable is the professional grade solution for long-lasting performance in direct burial installations. Designed and engineered for systems integrators, it features a UV-stabilised PE jacket and water-blocking gel filler to withstand harsh underground conditions (according to IEC 60794-1-2 F5B).

 

Meeting ANSI/TIA-568.2-D Cat6 standards, it supports reliable 1Gbps data transmission up to 100m, 10Gbps up to 55m, and PoE++. With solid 24AWG OFC conductors and a durable 6.3mm design, this cable offers robust, easy-to-install connectivity for buried network projects, including IP cameras, Wi-Fi access points, and security systems, all backed by Kordz’ 5 Year Warranty.

Select Colour Option:

  • Description
  • Order
  • Price (AUD$)
  • Product Code
  • Stock Level
  • Carton's QTY
  • 305m Spool, Black

    589.00 (incGST) K14703-305M-BK In stock

Frequently asked questions about product

Support and Resources

Industry news, insight and innovation.
Subscribe for more from Kordz.

Name(Required)
Name(Required)
This field is for validation purposes and should be left unchanged.
0
    0
    Your Cart
    Your cart is empty